الرئيسية / المنتجات / RAEGuard 3 / كواشف سامة والأكسجين / D06J-1330-008
D06J-1330-008 is a RAEGuard 3 toxic/oxygen detector: RGD 3HCLR+H. Gas —, range —, housing —, approval —.
| الجزء | المعنى | هذا الرقم |
|---|---|---|
| Prefix | D06 = RAEGuard 3 | D06 |
| ① Approval & housing | Other approval/config (selected) | J |
| ② Gas code | HCl, 0–30 ppm (10–30 ppm) | 13 |
| ③ HART/relay | Relay + HART | 3 |
| ④ Bluetooth | None | 0 |
| ⑤ Surge | None | 0 |
| ⑥ Gland | None | 0 |
| ⑦ Accessory kit | 8 | 8 |
| This SKU | RGD 3HCLR+H | D06J-1330-008 |
| العائلة | كواشف سامة والأكسجين |
|---|---|
| الغاز | — |
| المدى | — |
| الهيكل | — |
| الاعتماد | — |
| الخيارات | Relay+HART |
| Output | 4–20 mA (+ Relay/HART opt.) |
| Principle | electrochemical |
| الوصف | RGD 3HCLR+H |
Choose D06J-1330-008 for — at —. Hot-swap electrochemical cartridges simplify gas change-outs.
D06J-1330-008 is a «Toxic & oxygen detectors» instrument. Pair with cal cap, magnetic wand, weather cover, smart sensors and PCB/housing spares (Parts family). Hub: product-29015.
WWTP, labs, semiconductor, cold-store ammonia, chlor-alkali, pharma and general toxic/O₂ monitoring.
| رقم القطعة | الغاز | المدى | الهيكل | الاعتماد | الخيارات | الوصف |
|---|---|---|---|---|---|---|
| D06A-0300-000 | O₂ | 0–25 %v/v | SS | ATEX | — | RGD 3.SS,ATX.O2.STD-ATX |
| D06A-0301-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXO2BLESTD-ATX |
| D06A-0310-000 | O₂ | 0–25 %v/v | SS | ATEX | Relay | RGD 3.SS,ATX.O2.RELAY.STD-ATX |
| D06A-0320-000 | O₂ | 0–25 %v/v | SS | ATEX | HART | RGD 3.SS,ATX.O2.HART.STD-ATX |
| D06A-0330-000 | O₂ | 0–25 %v/v | SS | ATEX | Relay+HART | RGD 3.SS,ATX.O2.RELAY+HART.STD-ATX |
| D06A-0331-000 | — | — | SS | ATEX | BLE+Relay+HART | RGD 3SS,ATXO2R+HBLESTD-ATX |
| D06A-0400-000 | H₂S | — | SS | ATEX | — | RGD 3.SS,ATX.H2S.STD-ATX |
| D06A-0401-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXH2SBLESTD-ATX |
| D06A-0410-000 | H₂S | — | SS | ATEX | Relay | RGD 3.SS,ATX.H2S.RELAY.STD-ATX |
| D06A-0420-000 | H₂S | — | SS | ATEX | HART | RGD 3.SS,ATX.H2S.HART.STD-ATX |
| D06A-0420-100 | H₂S | — | SS | ATEX | HART+SPD | RGD 3.SS,ATX.H2S.HART.SPD.STD-ATX |
| D06A-0430-000 | H₂S | — | SS | ATEX | Relay+HART | RGD 3.SS,ATX.H2S.RELAY+HART.STD-ATX |
| D06A-0430-100 | H₂S | — | SS | ATEX | Relay+HART+SPD | RGD 3.SS,ATX.H2S.R+H.SPD.STD-ATX |
| D06A-0431-000 | — | — | SS | ATEX | BLE+Relay+HART | RGD 3SS,ATXH2SR+HBLESTD-ATX |
| D06A-0500-000 | CO | — | SS | ATEX | — | RGD 3.SS,ATX.CO.STD-ATX |
| D06A-0501-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXCOBLESTD-ATX |
| D06A-0510-000 | CO | — | SS | ATEX | Relay | RGD 3.SS,ATX.CO.RELAY.STD-ATX |
| D06A-0520-000 | CO | — | SS | ATEX | HART | RGD 3.SS,ATX.CO.HART.STD-ATX |
Orient the sensor per the manual; calibrate with the correct gas. Replace the smart cartridge when due — do not open the cell.
Stock is lot-based. Quote the full P/N D06J-1330-008, gas/range and approval. If short, pick from the family matrix — do not substitute a look-alike SKU.